Power Vent Water Heaters
The Premier Power Vent Water Heater is a
50-gallon residential gas water heater. What makes this style of
water heater different from the rest is that the Power-Vent
System uses a design that was made to help installations of
these heaters more efficient. This water heater is equipped with
a modular blower that has an electrical system that has 120 volt
and 60 Hz.
The Unit has a combination venting of vertical
and horizontal that runs through the outside wall. The pipe is
Schedule 40 PVC, the measurements is as follows, if you are
using 2″ pipe then you should allow up to 25 feet, if you are
using 3″ pipe, allow for 65 feet and if you are using 4″ pipe
then allow venting to run about 128 feet.
Check to make
sure that you have the room for the piping before you purchase a
water heater. The Premier Power Vent Water System also comes
with the PVC Pipe and elbows that are used to connect the heat
exchanger as well as the condensate elbows; drains and PVC Vent
Assemblies are also included.
The Power Vent gas fired
water heater also has side mounted taps that are used in the
re-circulating systems in the water heater. The taps are hot
water and cold water this combination allows the system to use
water heating in addition to space heating and radiant floor
heating systems. The water heater comes with the plugs for
re-circulating and is shipped with the water heater.
The
Premier Power Vent Water Heater is considered an environmentally
friendly unit. The Low NOx emissions make this water heater a
Green Choice Burner. The water heater reduces the Low NOx and
will reduce up to 33% of emissions. This also makes the water
heater more efficient, the less energy the heater uses the less
fuel it will use and it will save you money in the meantime.
The Premier Power Vent Gas Fired Water Heater uses their own
trademarked system called PEXAN Diffuser Dip Tube. This system
will aid in reducing lime and other mineral and sediments that
sometimes build up in the water heaters over time. The PEXAN
Diffuser Dip Tube uses a polymer material that can hold up
against a long time exposure to high temps up to 400 degrees
Fahrenheit.
This residential water heater also comes with
a factory installed Temperature and Pressure Relief Valve that
has a Maximum Working Pressure of 150 psi. It is very important
to read all of the manuals when you purchase a water heater. The
heater will last longer if you educate yourself on taking care
of it and planning proper inspections.
There is a Six
Year Limited Tank and Parts Warranty on this system. But like
the manuals it is important that you read the warranty
information to make sure that you understand how the warranty
works. All water heaters are 100% certified and tested before
they are sold to consumers. Consider Sugar Bear Plumbing, Inc.
for a quote.
You may request service by applying
on-line and save 15% off, or phone us, or email us
at
info@sugarbearplumbing.com.
Thank You. |